Bestellungen ab 90€ versandkostenfrei! Erfahre mehr
Setting the standard in the industry for years, the Losi® 22S No Prep Drag Car Roller kit lets racers create their personalized drag race car. With the popularity of No Prep Drag Racing exploding, Losi has once again taken it to the next level with a truly innovative design and the quality workmanship drivers expect. It has all the advantages of an aluminum chassis with plenty of 22s option parts, as well as being a pre-built roller. It's designed with racers in mind with Mickey Thompson branded large rear drag racing slicks and low drag, front tires. You get an all-metal gear transmission for concrete dependability and wire routes keeping your electronics and their wires in place and clean. The Elastomer battery mounting system is quick, easy and secure. Choose the electronics and body you want to run with and fly down the dragstrip in style.
The Mickey Thompson licensed rear tires will surely give you a great grip on the road, making sure you have the ultimate traction for the high powered brushless system that is included.
Mickey Thompson licensed front tires will provide you with plenty of tracking while having lower drag characteristics.
The Drag Car Roller comes standard with the all new 3mm Aluminum chassis provides accurate and positive grip to the road when you are pushing the limits of power and traction. This chassis is designed with electronics protection, side impact guards, and a clean wire management system.
Fine tune the weight of the front end to keep it under control and on the ground.
The Drag Car Roller incorporates an adjustable wheelie bar that lets you dial in the exact position for your wheelie bar run after run.
Fine tune the position of your battery with the addition of elastomer battery straps and make your battery changes quick and easy. No more messing with clunky hook and loop. Simply slap your battery in, pull across the strap and hook it.
These shock absorbers help keep the car incredibly stable and so you can maintain total control on even the toughest drag strips. Internal limiters help eliminate body roll and keep the car planted to the track.
Bleeder caps help you fine tune your shocks and get the perfect feel every time.
For added adjustability and tune-ability, adjustable turnbuckles come standard.
The Drag Car Roller comes with an all metal gear transmission for bullet-proof reliability to withstand anything you throw at it. Get your car down the lane without the fear of a broken transmission gear!
The sealed gear differential comes standard with 500,000k diff oil installed allowing you to throw as much power as you want.
| Approximate Assembly Time | 1 - 3 hours |
| Body | Not included |
| Brakes | Integral with ESC |
| Scale | 1/10 |
| Charger | Sold Separately |
| Receiver | Sold Separately |
| Shock Type | Oil-filled internal limited coil-over spring |
| Rear Track | 10.0" (256.5mm) |
| Speed Control | Sold Separately |
| Wheelbase | 13.1" (333 mm) |
| Vehicle Type | Drag Car |
| Completion Level | Roller |
| Drivetrain | 2WD |
| Drive Type | Forward/Brake/Reverse |
| Product Height | 5" (127 mm) |
| Ball Bearings | Full set |
| Chassis | 3mm plate, 6061-T6 aluminum |
| Battery | Sold Separately |
| Internal Gear Ratio | 2.43:1 |
| Product Length | 24.5" (622 mm) |
| Spur Gear | 84T |
| Suspension | Lower A-Arm, Upper Link |
| Front Track | 9.9" (252mm) |
| Vehicle Size | Standard |
| Product Width | 10.375" (264 mm) |
| Radio | Sold Separately |
| Power Type | Electric |
| Gear Pitch | 48P |
| Servos | Sold Separately |
Händler Suche
