VTOL (Vertical Takeoff and Landing) RC models are usually a mixed bag when it comes to performance. If they are stable, their speed and agility is often lackluster. If they are nimble, pilots have to work harder to transition between multirotor and airplane flight. The E-flite® Convergence® VTOL aircraft changes all that. Their unique designs and exclusive flight control software give you the best of both agility and stability while making the transition between multirotor and airplane flight so simple and predictable that you will feel comfortable and confident even on your first flight.
The E-flite® Mini Convergence® VTOL is a more compact version of its larger counterpart that you can fly in more places and smaller spaces—including indoors. Its smaller size, quiet brushless motors and refined flight control software makes it less intimidating and easier to fly in multirotor mode indoors, plus it’s easier than ever to transition between multirotor and airplane flight outdoors. The Mini Convergence uses a simple and sleek delta-wing design with three brushless motors—two rotating motors on the wing and a fixed-position motor in the tail. In multirotor flight, the wing-mounted motors rotate up into the vertical position to provide lift and flight control along with the motor in the tail. In airplane flight, the wing-mounted motors rotate forward into the horizontal position and the model’s elevons take over pitch and bank/roll control. You also get impressive yaw control in airplane flight with differential thrust from the motors.
Easy-to-use Stability and Acro flight modes deliver a wide range of performance.
Unlike more complex VTOL aircraft that rotate the entire wing and require as many as four motors to achieve vertical and forward flight, the Mini Convergence uses a simple and sleek delta-wing design with three brushless motors—two rotating motors on the wing and a fixed-position motor in the tail. In multirotor flight, the wing-mounted motors rotate up into the vertical position to provide lift and flight control along with the motor in the tail. In airplane flight, the wing-mounted motors rotate forward into the horizontal position and the model’s elevons take over pitch and bank/roll control. Yaw control in airplane flight is provided by differential thrust from the wing-mounted motors.
Making the transition between multirotor and airplane flight is as simple as flipping a switch. The flight controller will smoothly rotate the two wing-mounted motors into the correct positions and activate the rear motor as needed.
At the heart of it all is updated and refined flight control software that has been expertly tuned by our engineers. The end result is more consistent and reliable flight performance that makes it even easier for almost any RC pilot to experience the fun of VTOL flight.
The included decals give you multiple trim scheme themes to choose—from classic to sporty and even military inspired. Or you can easily personalize your trim scheme by using a combination of decals, paint or both.
For an FPV flying experience like no other, the Mini Convergence is set up to accommodate the recommended FPV camera and VTX (Video Transmitter)
This Plug-N-Play® version is ready to accept your 6+ channel Spektrum DSMX® compatible serial receiver that easily connects to the factory-installed flight controller for use with a full-range 6+ channel transmitter. No complex transmitter setup or programming is required. Your “GEAR” switch is used for selecting Stability or Acro mode and the “AUX 1” switch is used to transition between multirotor and airplane flight.
|Comletion :||PNP (Plug-N-Play)|
|Flying Weight :||8.46 â 8.9 oz (240 â 253 g)|
|Length :||16.5 in (419mm)|
|Minimum Speed Control :||(3) 6A Brushless|
|Motor Size :||(3) Brushless Outrunners|
|Recommended Motor Battery :||800mAh 11.1V 3S LiPo|
|Servos :||(2) Sub-Micro, (2) Micro Servos|
|Temps de montage approximatif :||No assembly required|
|Wing Area :||95.5 sq in (6.61 sq dm)|
|Wingspan :||16.3 in (410mm)|
Technical questions about this product should be directed to Horizon Hobby:
Horizon Hobby GmbH
US Product Support:
Mo - Fr: 2:00pm - 9:00pm (UK Time zone hours of operation)
English: +44 (0) 127 929 7061
Europe Customer Service & Tech Support:
Mo - Fr: 8:00am - 4:00pm
English: +44 (0) 127 929 7061
German: +49 (0) 40-822167800
French: +33 (0) 7 822 63 500
To submit a Horizon Hobby Service Ticket please visit our Service Ticket Form.
If you would like to purchase this product at a local retailer please visit our Store Locator.